ASTM D4587-05

本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節(jié)省您的時間，如需ASTM D4587-05標準詳細信息或ASTM D4587-05具體測試方法，請與我們技術人員聯系或給我們留言，我們將為您提供相關的技術支持。

ASTM D4587-05是油漆及相關涂料熒光紫外線曝露測試的標準測試方法：

本測試方法規(guī)定了油漆及相關涂料在熒光紫外線和冷凝裝置中根據G151 和 G154測試方法進行加速曝露測試時對測試條件的選擇。

ASTM D4587-05英文版本介紹

1. Scope

1.1 This practice covers the selection of test conditions for accelerated exposure testing of coatings and related products in fluorescent V and condensation devices conducted according to Practices G 151 and G 154. This practice also covers the preparation of test specimens, and the evaluation of test results.

Table 1 describes commonly used test conditions.

NOTE 1—Previous versions of this practice referenced fluorescent V devices described by Practice G 53, which described very specific equipment designs. Practice G 53 has been withdrawn and replaced by Practice G 151, which describes performance criteria for all exposure devices that use laboratory light sources, and by Practice G 154, which gives requirements for exposing nonmetallic materials in fluorescent V devices.

NOTE 2—ISO 11507:1997 also describes fluorescent V-condensation exposures of paints and coatings.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

2.1 ASTM Standards:

D 358 Specification for Wood to Be sed As Panels in Weathering Tests of Coatings

D 523 Test Method for Specular Gloss

D 609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D 610 Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces

D 659 Method of Evaluating Degree of Chalking of Exterior Paints

D 660 Test Method for Evaluating Degree of Checking of Exterior Paints

D 662 Test Method for Evaluating Degree of Erosion of Exterior Paints

D 714 Test Method for Evaluating Degree of Blistering of Paints

D 772 Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints

D 823 Practices for Producing Films of niform Thickness of Paint, Varnish, and Related Products on Test Panels

D 1005 Test Methods for Measurement of Dry-Film Thickness of Organic Coatings sing Micrometers

D 1186 Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base

D 1400 Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base

D 1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely Illuminated Opaque Materials

D 1730 Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

D 2244 Practice for Calculation of Color-Tolerances and Color Differences from Instrumentally Measured Color Coordinates

D 2616 Test Method for Evaluation of Visual Color Difference With a Gray Scale

D 3359 Test Methods for Measuring Adhesion by Tape Test

D 3980 Practice for Interlaboratory Testing of Paint and Related Materials3

D 4214 Test Methods for Evaluating Degree of Chalking of Exterior Paint Films

D 5870 Practice for Calculating Property Retention Index of Plastics

E 691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E 1347 Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colormetry

G 53 Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent V-Condensation Type) for Exposure of Nonmetallic Materials3

G 113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G 141 Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials

G 147 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests

G 151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices That se Laboratory Light Sources G 154 Practice for Operating Fluorescent Light Apparatus for V Exposure of Nonmetallic Materials

G 169 Guide for Application of Basic Statistical Methods to Weathering Tests

2.2 ISO Standard:

ISO 11507:1997 Paints and Varnishes—Exposure of Coatings to Artificial Weathering—Exposure to Fluorescent V and Water

2.3 SAE Standard:5

SAE J2020 Accelerated Exposure of Automotive Exterior Materials sing a Fluorescent V Condensation Apparatus